Not yet rated Add your review
Nylon Filament is a slightly flexible filament, very strong and has excellent printing properties. Nylon Filamet is therefore very suitable for a 3D print in which toughness and flexibility play an important role.
Nylon is a trivial name for a group of synthetic polymers. The Nylon filament supplied by Hestay is type PA6. The filament is available in seven different colors and 1.75 or 3.00 mm in diameter. Both with a maximum tolerance of 0.05 mm.
Advantages of Nylon:
+ Very strong
+ Odorless during 3D printing
- Very high nozzle temperature required (> 250 ° C)
- Quick and a lot of warping
- Requires airtight storage
Nylon is more difficult to 3D print than most other filaments. We encourage you to read this page . Here we have described all the information and necessary settings for your 3D printer so that you can 3D print 3D printing with successful 3D prints.
Other specific information about this product can be found under the product specifications under the tab "specifications".
If you encounter problems during 3D printing with Nylon filament, please look under the heading "3D print help" at the top of this page. Here you will find an explanation with a solution to common problems during 3D printing.
If you have any doubts about which filament is best suited for your application, then look at the filament comparator . On this page you will find a table in which all types of filaments are compared with each other at different points so that you can determine which filament fits best for your application.
Diameter: | 1.75 mm / 3:00 mm (± 0.05mm) |
Weight: | 1 kg |
Material: | Nylon |
Print Temperature: | 240-260 ° C |
Printbed Temperature: | 90-110 ° C |
hallmark: | CE, RoHS |
De waardering van www.hestay.nl bij Webwinkel Keurmerk Klantbeoordelingen is 9.5/10 gebaseerd op 120 reviews.