This product is an PETG filament sample package in the color and diameter of your choice.
PETG filament is a 3D-printer filament comparable to PLA filament. PETG is easily 3D-Printed and gives the 3D-Prints a unique and stunning finish thanks to the transparent color(s).
PETG is an improved variation of the famous PET plastic used for most household bottles. PETG filament is a 3D-printer filament comparable to PLA filament. A 3D-Printed object made with PETG filament is however not bio degradable and can survive the harsh environment.
Pro’s and Con’s of PETG:
+ Easy to 3D-Print
+ Odorless during printing
+ Unique transparent finish
- Very high nozzle temperature required (>250oC)
- Limited thermal resistance (<50oC)
PETG filament is, with the right settings and proper 3D-Printer, pretty easy to 3D-Print. We do, however, recommend reading the PETG Filament 3D-printer Settings page thoroughly. Here you will find all the necessary information and proper 3D-Printer settings to start printing successful 3D-Prints with HIPS 3D-Printer filament.
Other specific informational topics about this product can be found under the tab ‘’Specifications’’ under the product picture.
If you are experiencing problems during 3D-Printing with PETG filament, take a look under the tab ‘’3D-Print support’’ on the top of the page. Here you will find explanations and solutions to many common problems that can occur during 3D-Printing.
If you are unsure about which filament you need to choose for your projects, take a look at our filament comparison page. There you can find a table filled with all the available filaments and their corresponding properties setup so you can find the filament that suits your application perfectly.
If you have any questions about PETG filament or about 3D-Printing PETG filament, feel free to contact our customer support service.
|Diameter:||1.75 mm / 3:00 mm (± 0.05)|
|Weight:||40 Grams / 1.41oz|
|Material:||PETG (polyethylene terephthalate glycol)|
|Nozzle Temperature:||240°C - 260°C|
|Bed Temperature:||60°C - 70°C (not required)|